Flowell Valves and Forge Inds

Profile

Enquiry

Clientele

Contact

Home

Stockists:

NETA

RACER

VICTOR

FLOVELL

Bronze Globe ValveSE/FE

Bronze ‘Y’ Type Strainer

Bronze Spring Loaded
Safety Valve( Pop Type)

Bronze TD3 Trap

Bronze Lift Check Valve

Bronze Accessible Feed Check Valve

Bronze Fusible Plug

Bronze Parallel Slide Blow
Off Valve

Bronze Sleeve Packed
Water Level Gauge

C.I.Globe Stop Valve

C.I. Horizontal Lift Check Valve

C.I. Pilot Operated Valve

C.I. Strainer

C.S. Globe Valve

C.S. Lift Check Valve

C.S. Gate Valve

C.S. Water Gauge

C.S. Blow Off Valve

Forged Steel Gate Valve

Forged Steel Globe Valve

Forged Steel Horizontal lift
Check Valve

Gun Metal Wheel (Globe) Valve

Gun Metal Wheel (Globe) Valve No.9

Gun Metal Union Bonnet Globe Valve

Gun Metal Gate valve Peglar Type Standard

Gun Metal Vertical
Check Valve

Gun Metal Horizontal Check Valve

Gun Metal Gland Cock (Plug Type)

For Orders Call

+91 - 09322446044

(022) 32500525

NETA - An ISO 9002 Certified Company

CERTIFICATION : IBR Test Certificate in form III-C duly signed by the Director of Boilers Punjab is provided for valves to be used on steam service. For services other than steam our own Works Test Certificate shall be provided.

Cast Iron Globe Stop Valve
Cast Iron Horizontal Lift Check Valve

Cast Iron Globe Stop Valve

Description:
NETA Cast Iron Globe Stop Valve BS:5152, Bolted Bonnet, Straight / Right Angle Pattern, Outside Screw and Yoke Type Rising Stem, Stainless Steel 13% Cr (AISI-410) / 18/8% Cr / Ni Stainless Steel (AISI-304) / Bronze Trim, Flanged Ends to BS:4504 Part-1 Table 16/11/DIN 2533 PN 16.

Right Angle Pattern

Straight Pattern

Test Pressure	Body - 26 Kg/cm2Gauge Hyd.
Test Pressure	Seat - 16 Kg/cm2Gauge Hyd.
Max.Steam Working Pressure	13 Kg/cm2Gauge
Max. Working Temp.	220°C
Size Range	15mm to 200mm

Cast Iron Horizontal Lift Check Valve

Description:
NETA Cast Iron Horizontal Lift Check Valve BS:5153, Bolted Cover, Straight / Right Angle Pattern, Stainless Steel 13% Cr (AISI-410) / 18/8% Cr / Ni Stainless Steel / (AISI-304) / Bronze Trim, Flanged Ends to BS:4504 Part-1 Table 16/11/DIN 2533 PN 16.